- Inquiry
10 Ton Heavy Duty Welding Bottle jack
? Zinc plated long handle allows ease of pumping.
? Welded construction NO LEAK.
? Safety valve prevents the ram from being overextended and causing damage to the cylinder.
? Inner safety valve prevent the user to adjust the system.
? Arc surface bottom of the steel base to make the load in the center of the piston.
? Prevent rust with ENP (electroless nickel plating) ram piston, make it smooth, bright, and long life.
? Double seals in the pump to prevent the oil leak.
? Light weight forged base provides more steel only where strength is required.
? This design creates a better, stronger design with the tank welded directly to the forged base.
? Longer life than normal screw connection jack due to smooth bearing surfaces and close tolerances.
? Carrying handles on big capacity jack for easy transport.
產品參數
其他型號
關于產品
Product Information
Product Parameters
|
Model |
TH910001 |
Capacity |
10 Ton |
|
Min. Height |
220 mm |
Lifting Height |
153 mm |
|
Adjustable Height |
115 mm |
Max. Height |
488 mm |
|
N.W./G.W. |
7.37 / 7.56 kg |
Package Size |
745x175x250 mm |
|
QTY/CTN |
5 PCS |
QTY/20'CY |
2222 PCS |
Features
• Zinc plated long handle allows ease of pumping.
• Welded construction NO LEAK.
• Safety valve prevents the ram from being overextended and causing damage to the cylinder.
• Inner safety valve prevent the user to adjust the system.
• Arc surface bottom of the steel base to make the load in the center of the piston.
• Prevent rust with ENP (electroless nickel plating) ram piston, make it smooth, bright, and long life.
• Double seals in the pump to prevent the oil leak.
• Light weight forged base provides more steel only where strength is required.
• This design creates a better, stronger design with the tank welded directly to the forged base.
• Longer life than normal screw connection jack due to smooth bearing surfaces and close tolerances.
• Carrying handles on big capacity jack for easy transport.
Common Problems And Solutions
1. When lifting heavy weights, the mandril fails to rise to the maximum route. When the jack reaches a certain height, and the maximum route is not reached, the mandril cannot rise up any more, which indicates that there is a lack of working oil in the jack, and it should be replenished.
2. The mandril wobbles while rising. Generally the oil return valve is not closed tightly; we can tighten oil return valve needle in counterclockwise direction. If it is still unstable, check whether there is any oil leakage around the pressure rod; if the oil leaks, it indicates that the seal ring of the mandril is damaged, and it should be replaced. If there is no oil leakage, confirm again whether the oil return valve and the inlet valve is already locked, and also check sealing gasket conditions in the cylinder end joint of pressure rod; if all the above is normal, then it indicates that the seal ring is damaged, or the fixed screw is loosening, we should replace it or tighten the screw.
3. The mandril fails to rise while no-load. First check the oil amount of the jack, and we should add oil when insufficient. If jack is not short of oil, we can loosen the oil return valve needle of the jack, remove the oil plug of oil filling port, then trample on the jack base by our feet, repeatedly pull up the mandril and press down again by our hands for several times, in order to exhaust air; after the above actions are completed, tighten the oil plug of oil filling port and oil return valve tightly, and then try again the no-load mandril; if the mandril still cannot rise, lay jack flat, remove the oil return valve, check whether the valve and seat contact well; if there is dirt, it should be removed; if there is pit, slot and uneven, it should be replaced. Finally check whether the oil inlet valve is well sealed and the sealing ring of mandril is damaged or falls off. If any, replace it in time.
4. Oil leakage, can be seen by visual observation. The oil leakage area of the jack is usually in the base and the cylinder joint, around the mandril, in the lock thread of the oil return valve, in the fixed oil plug of the oil filling port, around pressure rod etc. The cause of oil leakage is usually the damage of sealing gasket, it must be replaced in time.
成分-
優質液壓油，防止漏油
液壓系統采用高質量的油，提供更好的耐腐蝕性和高/低溫靈活性，允許單元在40華氏度和105華氏度之間的溫度下運行。
自動焊接
該閥采用細鋼焊接而成，操作方便，密封性好，性能可靠，具有自動鎖氣滴料功能。
高密度鋼材
由高級鋼材制成，并按照嚴格的質量和耐用性標準建造。
你可能也喜歡
型號
15噸專業液壓車間壓力機
10Ton液壓車間壓力機
30 ton氣動液壓瓶千斤頂
35TonPneumatic Hydraulic Bottle Jack
2Ton Hydraulic Trolley Jack
1.5/2Ton Hydraulic Trolley Jack
特點
? 安全閥
? 工業密封件
? 機器人焊接
? 激光切割框架
? 可拆卸零件托盤
? 雙速泵
? 重型H型框架由高級鋼制成，并按照嚴格的質量和耐用性標準建造
? 在徹底的化學清洗后應用無鉛漆面，以確保持久的光潔度并幫助防止生銹
? 油漆是油，油脂和污垢，易于清理
? 高質量的大直徑液壓鋼缸單元導致提高負載所需的較低油壓，有助于減少磨損并延長使用壽命
? 活塞閘板經過處理和拋光，以防止打滑
? 活塞-ram采用帶支撐環的y型聚氨酯密封圈，防止負載緩慢下降或繞過油漂移
? 液壓系統采用高質量的油，提供更好的耐腐蝕性和高/低溫靈活性，使設備能夠在40華氏度和105華氏度之間的溫度下運行
? 超長手柄包括容易抽吸力
? 專為大量商業用途而設計。
? 快速高效的空氣泵減少提升時間。
? 硬化合金電鍍r(jià)am最大的耐久性。
? 帶集成過濾器的空氣閥，密封液壓?jiǎn)卧?br />? 重型空氣馬達提供最大功率。
? 防止污染。
? Designed for heavy commercial use.
? Fast efficient air pump reduces lifting time.
? Hardened alloy-plated ram for maximum durability.
? Air valve with integrated filter, seal hydraulic unit.
? Heavy-duty air motor provides maximum power.
? Prevents contamination.
? The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
? Safety bypass system prevents over-loading and ensures safe operation.
? Steel casters for longevity.
? The hydraulic technology makes lifting simple while a wider frame and internal bypass valve ensure safety.
? Safety bypass system prevents over-loading and ensures safe operation.
? Steel casters for longevity.